TMT Automation ChowBELL, User Manual

Page: 9 / 12

Connect ChowBELL to Chow! App
7
Tap (+) icon to add a new device.
New Device -> Accessories -> ChowBELL
Set the security PIN code. This PIN code is used for device sharing and function setting.
After the countdown, ChowBELL will appear on the main page.
Tap the ChowBELL to enter the operation page.
The ChowBELL will send a push notification when below events occur
visitor calls / alarms / motion detection is triggered.
Select your home Wi-Fi and enter the password. Tap the “set” button to connect to your
home Wi-Fi.
Make sure the ChowBELL is perfectly installed and powered.
Download and install Chow! App.
Enable your smartphone’s Wi-Fi function and connect to a 2.4GHz Wi-Fi network.
Go to the Chow! app, register and login your account.
Switch to your smartphone’s Wi-Fi setting page to connect to
“GW_AP_XXXXXXXX” (XXXXXXXX is the UID of the device)
***Please refer to the FAQ if GW_AP of the ChowBELL cannot be found***
***Please refer to the FAQ if you forgot the password***
***DO make sure to enter the correct password***