TMS Lite High Current Series, User Manual

Page: 26 / 28

TMS Lite LC-18-1CH-X10 & 2CH-X5 CONTROLLER UNIT
25
4. Write to Slave
Command List
Command Code (YY) Command Description Data No. of Byte
SM Set Channel Mode
0 = Constant
1 = Strobe
2 = Trigger
1
SR Set Current Multiplier 1-10 2
SI Set Intensity 0 - 255 3
SD Set Strobe Delay 0 – 9999 (99.99ms) 4
SW Set Strobe Width 0 – 9999 (99.99ms) 4
SY Set Output Delay 0 – 9999 (99.99ms) 4
SH Set Output Width 0 – 9999 (99.99ms) 4
ST Strobe NONE 0
EE Save EEPROM NONE 0
*Remark: For Save EEPROM function, use any channel no. for x value, all channels’
parameters will be saved
Return Message
Controller will send a return message same as the command sent to the controller to indicate
successful sending.
If wrong command or data are sent, a message of {ERR} in the bracket will be returned.
5. Read from Slave
Command List
Command Code (YY) Command Description
Return
Data (ZZZZ) No. of Byte
RM Read Channel Mode
0 = Constant
1 = Strobe
2 = Trigger
1
RR Read Current Multiplier 1-10 2
RI Read Intensity 0 – 255 3
RD Read Strobe Delay 0 – 9999 (99.99ms) 4
RW Read Strobe Width 0 – 9999 (99.99ms) 4
RY Read Output Delay 0 – 9999 (99.99ms) 4
RH Read Output Width 0 – 9999 (99.99ms) 4
RV Read Version WXYZ (W.X.Y.Z) 0
*Remark: For Read Version function, use any channel no. for x value