Turning the unit ON / OFF
The power to the AP46 unit should be connected via a
suitable 15 amp circuit breaker.
MANUAL Mode
In this mode
•
The display screen shows “H***” ; (***) being the current vessel
magnetic heading in degrees.
•
No steering control is generated.
AUTO Mode
•
Press the AUTO button. AUTO mode will be selected. A beep will
sound and the text display will change to “A***”. The Auto LED
will light
The autopilot will lock on the current heading.
The course-to-steer is shown on the display.
Disengaging AUTO mode:
Press the AUTO button, a beep will sound and the vessel will
return to manual steering.
Course Adjustment:
Each press of the
<
or
>
buttons will give a course change of 1˚
in the applicable direction. The display will change to indicate
the new course-to-steer. By pressing and holding the buttons
TMQ AP46 Autopilot
Page 9 of 34
Ver1.0 07/03/2007
