If there is excess belt play. There could be a decrease
in the impact force or erratic vibration, causing
machine damage.
1-4. Check the engine oil level and if the engine oil lever
is low, it should be refilled. Use the proper motor oil
as suggested in the table below. (Fig-1)
1-5. Remove the oil plug in the vibrator assembly and
check the oil level. Make sure the compactor is level
when checking. The oil level should be up to the oil
plug. Every month or every 200 hours of operation,
replace the oil.
IMPORTION
Use the motor oil SAE
When changing the oil, the old oil can be drained by tipping the unit. The oil will drain easily while it is hot.
1-6. A regular grade gasoline should be used in the engine.
When filling the fuel tank, make sure the fuel filter is used.
7.2 CAUTION
2-1. Be careful with the operating place and ventilation. Avoid operating the machine in a closed room,
tunnel, or other badly ventilated places, since its exhaust contains deadly poisonous carbon monoxide. If the
machine is employed unavoidable operated in such a place, discharge the exhaust out the room by a suitable
means.
2-2. Be careful with the hot members.
Mufflers and other hot members are dangerous.
Do not touch them with unprepared hand.
2-3, Observe with the following cautions when transporting. Clamp fuel tank cap securely, and turn the fuel
have OFF at the source during Drain gasoline from fuel tank before transporting over a long distance or on
rough roads.
2-4.
Stop engine without fail before replenishing fuel tank.
Never replenish gasoline while the engine is running or remains hot otherwise spilled or evaporated fuel is
liable to catch fire from engine sparks or muffler heat.
Wipe off spilled fuel, if any, before starting engine. Be careful not to spill fuel.
2-5. Keep inflammable way from the vicinity of the exhaust port.
Be careful with gasoline match, straw and other inflammable, since the exhaust port is subjected to a high
temperature.
WWW.TMGINDUSTRIAL.COM
P
8
/
18
Toll Free:1-877-761-2819
