W W W . T M G I N D U S T R I A L . C O M
P 0 2 / 2 8
T o l l F r e e : 1 - 8 7 7 - 7 6 1 - 2 8 1 9
IMPORTANT NOTICE
Do not attempt to install this lift if you have never been
trained on basic automotive lift installation procedures.
Never attempt to lift components without proper lifting
tools such as forklift or cranes. Stay clear of any moving
parts that can fall and cause injury. These instructions
must be followed to ensure proper installation and
operation of your lift. Failure to comply with these
instructions can result in serious bodily harm and void
product warranty. Manufacturer will assume no liability
for loss or damage of any kind, expressed or implied
resulting from improper installation or use of this product.
PLEASE READ ENTIRE MANUAL
PRIOR TO INSTALLATION.
DEFINITIONS OF
HAZARD LEVELS
Identify the hazard levels used in this manual with the
following definitions and signal words:
DANGER !
Watch for this symbol: It Means: Immediate
hazards which will result in severe personal injury or
death.
WARNING !
Watch for this symbol: It Means: Hazards or
unsafe practices which could result in severe
personal injury or death.
CAUTION !
Watch for this symbol: It Means: Hazards or unsafe
practices which may result in minor personal injury,
product or property damage.
OWNER’S RESPONSIBILITY
To maintain the lift and user safety, the responsibility of
the owner is to read and follow these instructions:
Follow all installation and operation instructions.
Make sure installation conforms to all applicable
Local, State, and Federal Codes, Rules, and
Regulations; such as State and Federal OSHA
Regulations and Electrical Codes.
Carefully check the lift for correct initial function.
Read and follow the safety instructions. Keep
them readily available for machine operators.
Make certain all operators are properly trained,
know how to safely and correctly operate the unit,
and are properly supervised.
Allow unit operation only with all parts in place
and operating safely.
Carefully inspect the unit on a regular basis
and perform all maintenance as required.
Service and maintain the unit only with authorized
or approved replacement parts.
Keep all instructions permanently with the unit
and all decals on the unit clean and visible.
BEFORE YOU BEGIN
Receiving:
The shipment should be thoroughly inspected as soon
as it is received. The signed bill of lading is
acknowledgement by the carrier of receipt in good
condition of shipment covered by your invoice. If any of
the goods called for on this bill of lading are shorted or
damaged, do not accept them until the carrier makes a
notation on the freight bill of the shortedor damaged
goods. Do this for your own protection.
NOTIFY THE CARRIER AT ONCE if any hidden loss or
damage is discovered after receipt and request the
carrier to make an inspection. If the carrier will not do
so, prepare a signed statement to the effect that you
have notified the carrier (on a specific date) and that the
carrier has failed to comply with your request.
IT IS DIFFICULT TO COLLECT FOR LOSS OR DAMAGE
AFTER YOU HAVE GIVEN THE CARRIER A CLEAR
RECEIPT. File your claim with the carrier promptly.
Support your claim with copies of the bill of lading,
freight bill, invoice, and photographs, if available. Our
willingness to assist in helping you process your claim
does not make responsible for collection of claims or
replacement of lost or damaged materials.
