Page
4
of
9
Installation steps
Step 1 : Review the whole structure and choose the proper installation site
Choose a solid flat level ground area to set up the building. Do not install the building on
soft ground, wetland, uneven surfaces, sloped surfaces, or on top of structures that are not
rated to hold its weight.
We strongly recommend that you build the structure on a solid foundation such as
cement and use anchor bolts on all baseplates.
Be aware of the surrounding area. Do not set up the building near snowdrifts, open flames
or exposed electrical wires. Do not keep heat sources near the fabric cover. Keep the
building surroundings clear at all times.
Mark the ground in the final building location with a line showing the positions of
base plates, front, and rear doors. All lines should be drawn from center to center of
all baseplate tubes. Diagonal line X must be equal to Y.
Baseplates: all baseplates must be installed firmly with expansion bolts (#10)
on this step (Figure 1).
Parts used in this step :
-
(4) Baseplates (#7L,7R)
-
(12) Baseplates (#8)
-
(48) Expansion bolts M12 (#10)
Figure 1
Summary of Contents for TMG-203012PST
Page 1: ...Page 0 of 9...
