4
VENTED LOOPS
25mm(1”) for waste outlet discharge.
25mm(1”) for macerator toilet discharge.
38mm(1-1/2") for waste pump discharge.
25mm(1”) for water inlet discharge.
Vented loops are required for below waterline installations and hose connections must be
double clamped.
Top of the loop must be above waterline.
Intake vented loops must be installed between pump and back of the bowl.
Discharge vented loops must be installed between the discharge of toilet and seacock.
Do not position the vented loops between the in-let sea-cock and the flushing pump inlet.It
will make the flushing pump difficult or harder to prime, and could prevent it from working at
all.
CAUTIONS
Always close sea-cocks when leaving boat unattended.
Always close sea-cocks when toilet is not in use.
Failure to do so may result in flooding which can cause loss of property and life.
Do Not apply flame or heat to hoses.
Do Not apply sealing compounds to any hose connection.
Do Not use thick liquid toilet cleansers or neat bleach because they may damage the
valves, gaskets and seals.
If the toilet is plumbed to the vessels portable water supply you must install an anti-syphon
breaker valve on the toilet inlet pipework to prevent water supply contamination.
Do Not dismantle the product without the help of authorized technician. For any questions,
please contact with your original seller or dealer.
Correct motor polarity (Red to positive (+), Black to negative (-)) is important. Reverse
polarity can damage motor and void warranty. Full voltage at the motor is required to
properly operate the Electric Toilet. The toilet must be wired in a circuit independent of all
other accessories.
The toilet bowl body is made of vitreous china and it’s fragile.
Do Not drop the product from high place or with heavy force.
Please handle the product with care.
SLOW-CLOSE FEATURE
For TMC 29920, 29921, 29930 & 29932
Designed to prevent annoying slam or
sudden drop of the seat
Seat & cover can be slow closed
individually.
Slow-close feature will be activated when
the seat & cover is bent over 70 degrees.
