Compact IP Codec User's Manual
13
Techno Mathematical Co., Ltd.
2140P
Click ENCODER to configure encoder settings, or DECODER for decoder settings.
ENCODER
DECODER
Figure 4-2 Application Software Icons
Under initial default settings, select Default and then click [Connect].
Figure 4-3 Select Connection IP and Port
*If you changed the remote connection IP address and port number using the
procedures under "4.2. Basic Encoder Settings" or "4.3. Basic Decoder Settings,"
click [Add] and then add the changed values. Remarks can be left blank.
*An error message will appear if connection is not possible due to IP address
mismatch.
The screens shown below will appear following startup. From here on,
explanations will be based on these screens.
Figure 4-4 Screen After the Connection
To exit the application software, click the close button ([x]) in the upper right
corner.