TMC TI6VG4, User Manual, Page: 48 / 80

Chapter 6 BIOS Configuration
44 TI6VG4 User’s Manual
PM Control by APM
This field allows you to use the Advanced Power Management device to
enhance the Max. Power Saving mode and stop the CPU’s internal clock.
If the Max. Power Saving is not enabled, this will be preset to NO.
Video Off After
When enabled, this feature allows the VGA adapter to operate in a power
saving mode. The options are as follows:
N/A Monitor will remain on during power saving modes.
Suspend Monitor blanked when the system enters the Suspend mode.
Standby Monitor blanked when the system enters Standby mode
Doze
Monitor blanked when the system enters any power saving
mode.
Video Off Method
This field defines the Video Off features. There are three options.
V/H SYNC + Blank Default setting, blank the screen and turn off
vertical and horizontal scanning.
DPMS Allows the BIOS to control the video display card
if it supports the DPMS feature.
Blank Screen This option only writes blanks to the video buffer.
Modem Use IRQ
This field defines the IRQ being used by the modem. By default, the IRQ
is set to
3 .
Soft-Off by PWRBTN
This field defines the power-off mode when using an ATX power supply.
The
Instant Off mode allows powering off immediately upon pressing the
power button. In the Delay 4 Sec mode, the system powers off when the
power button is pressed for more than four seconds or enters the suspend
mode when pressed for less than 4 seconds. The default value is
Instant
Off .
PWRON After PW-Fail
In case of power failure, the system can be configured to power on or to
remain off when the power returns. These settings are
Former-Sts , On
and Off . The default setting for this field is Off .