TMC AI5VG+, User Manual

Page: 48 / 59

Chapter 6 BIOS Configuration
44 AI5VG+ User’s Manual
CPU/PCI Clock Select
The default settings for the CPU/PCI clock are 66/33MHz (default) and
100/33MHz , depending on the bus speed of the CPU you have installed.
If overclocking causes the system to be unstable, use the defaults. Note
that
112/37MHz , 124/41MHz and 133/44MHz settings are only
supported if your motherboard has an ICS 9148AF-58 clock generator.
IMPORTANT NOTE: When your system does not boot
because the CPU has been changed, turn off the computer by
pressing the power button and turn it on again by pressing the
Insert key and the power button simultaneously. ( Note to press
the Insert key until an image appears on the screen. ) When the
system is turned on, press the
Delete
key to enter BIOS Setup
and configure the CPU speed.
OnChip USB
This field allows you either to enable or disable the USB function.
USB Keyboard Support
The default setting of this field is Disabled.
6.6 Power Management Setup
The Power Management Setup allows you to save energy of your system
effectively. It will shut down the hard disk and turn off video display after
a period of inactivity.
ROM PCI/ISA BIOS (2A59IM29)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
Power Management : User Define Primary INTR : ON
PM Control by APM : Yes IRQ3 (COM2) : Primary
Video Off Option : Suspend -> Off IRQ4 (COM1) : Primary
Video Off Method : V/H SYNC +Blank IRQ5 (LPT 2) : Primary
MODEM Use IRQ : 3 IRQ6 (Floppy Disk) : Primary
Soft-Off by PWRBTN : Instant-Off IRQ7 (LPT 1) : Primary
** PM Timers ** IRQ8 (RTC Alarm) : Disabled
HDD Power Down : Disabled IRQ9 (IRQ2 Redir) : Secondary
Doze Mode : Disabled IRQ10 (Reserved) : Secondary
Suspend Mode : Disabled IRQ11 (Reserved) : Secondary
** PM Events ** IRQ12 (PS/2 Mouse) : Primary
VGA : OFF IRQ13 (Coprocessor) : Primary
LPT & COM : LPT / COM IRQ14 (Hard Disk) : Primary
HDD & FDD : ON IRQ15 (Reserved) : Disabled
DMA / master : OFF ESC : Quit
Ç È Æ Å
: Select Item
PWR ON by Modem/LAN : Disabled F1 : Help PU/PD/+/- : Modify
RTC Alarm Resume : Disabled F5 : Old Values (Shift) F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults