SRP9100 RADIO P25 – OPERATING INSTRUCTIONS
4. MENU SCREENS
4.1 C
HANNEL
S
CREEN
M
Special Ops
Zone 4
Typical Display
M
Icons
The Channel Screen shows the current channel and allows channel selection.
The
Channel Name
(top line)
shows the text associated with the currently selected radio
channel.
The
Zone Name
(middle) shows the text associated with the currently selected radio zone.
The
RSSI Bars
indicate the signal strength of the current channel.
The
Battery Bars
indicate the battery charge level.
Pressing the “
M”
key enters the
Menu
mode.
The lower part of the screen is reserved for icons.
Radio channels may be configured with the Field Programmer as specific frequencies or as
auto scan types. When an auto scan channel is selected, it will immediately go into scan
mode. Selecting another non-autoscan channel will stop the scan.
If a radio channel is defined as a P25 Conventional Digital Channel, it will only receive P25
digital signals.
If a radio channel is defined as an Analogue FM channel, it will receive both P25 Digital* and
Analogue FM signals.
* While in Analogue mode, all unencrypted digital P25 traffic will be heard regardless of NAC
or Talkgroup.
© TMC Radio 2007
Page 12
TNM-U-E-0073 1.1b
