ProPlex IQ Two 88 User Manual v1.1—18 February 2021
11
DMX RATE
Press <DOWN> or <UP> buttons to choose DMX refresh rate value.
Press <SELECT> or <RIGHT> to set or <LEFT> to decline.
Press <LEFT> to return to the home screen.
The DMX refresh rate setting controls how many times per second the
device outputs DMX over 5-pin XLR connectors. Some DMX devices
work better using different refresh rate settings. For high-speed
devices like LED walls and displays, using the “Adaptive” option can
improve response time by matching the incoming refresh rate of DMX
coming from the source.
2X IDLE RESEND
Press <DOWN> or <UP> to choose 2x Idle respond time (0.5s-4.0s).
Press <SELECT> or <RIGHT> to set or <LEFT> to decline.
Press <LEFT> to return to the home screen.
This setting determines the time ArtNet will refresh the signal after idling.
Select from 0.5s, 1s, 2s or 4s. This only applies to ProPlex IQ Two DMX
connectors set to input mode. Some consoles may not resend a DMX
packet if there is no change in the value. ArtNet idle resend time ensures
ArtNet regenerates this unchanged value as some devices like media
servers and moving light need recurring DMX over ArtNet even if no
change in values exist.
UNIVERSE FORMAT
Press <DOWN> or <UP> to choose how Universe format for DMX ports
will be displayed at the home screen. Press <SELECT> or <RIGHT> to
set or <LEFT> to decline.
Press <LEFT> to return to the home screen.
