Scene activity LEDs:
Record static scene
To record a static scene, press and hold the selected scene button until the LED flashes red.
Flashing red indicates the scene has been recorded. Release the button. Static scenes glow orange
when recording is complete but inactive. The scene LED will be solid green when active and flash
green when Fade IN/OUT is active.
Record dynamic scene
To record a dynamic scene, press and release the button. The scene will flash red while recording.
To stop recording, press and release the button once more. The Dynamic scene flashes orange
when recording is complete but inactive. The scene LED will be solid green if active and flash green,
when Fade IN/OUT is active.
Overwrite scenes
To overwrite scenes, press REC for three seconds until the red LED illuminates. Press and hold the
desired scene button to write over new static memory or press and release to start recording
dynamic memory.
If the ProPlex 6-Track is receiving power, but none of the scene LEDs are illuminated, there are no
scene files saved on the SD card.
There are no scenes to be played
Static scene
Active scene
*
*blinking
