Configuration
DMX-IN mode (MERGE/TRIGGER)
•
Merge mode – DMX input data is merged (HTP) With active scenes.
•
Trigger mode – For triggering recorded scenes.
Note!
Record scenes only in merge modes; 6-Track will not record in trigger mode.
DMX-IN priority (this applies only to merge mode)
•
LOW
•
Normal (default)
•
High
Trigger mode
(YES/NO)
•
Y- Latch on (default) – each button press toggles the scene ON and OFF.
•
N- Latch off – scene is active only when button manually held down.
DMX channel for DMX-IN trigger mode:
(1-512)
Fade-IN and Fade-OUT time in seconds:
(0-9)
Priority system:
•
Each memory and DMX input has assigned priority (default is normal).
•
We consider each scene and DMX input a DMX “Source.” The scene is an active source if it is
on, DMX is active source if unit is receiving DMX (even if all data is 0)
•
Higher priorities override lower priorities if active. Same priority level source merge (htp)
Loop (applies only to dynamic memories)
•
On(default) loop dynamic memory playback
•
Off- play dynamic memory only once
