TMB MV PLUS, Use And Maintenance Manual

Page: 22 / 60

E
N
22
PREPARATION OF THE APPLIANCE
Since the packaging elements (plastic bags, staples, etc.) are a
including packaging, is 11 kg.
(Fig.1) :
HANDLING THE PACKED APPLIANCE
1. Open the outer box.
2.
the ground.
3. Take out the vacuum head carton.
4.
(Fig.2) ,
5.
HOW TO UNPACK THE APPLIANCE
handle, taking care not to damage either.
ATTENTION: it is recommended that all the packaging
components be kept for any future transportation of the
appliance.
ATTENTION: Users are advised to always wear protective
gloves, to avoid the risk of serious injury to hands .
A: 415 mm
B: 465 mm
C: 485 mm
1.
condition (see “ MACHINE SAFETY ”).
2.
(Fig.3) .
3. Insert the appliance into the protective bag, taking care not to
damage either during this operation.
4. Insert the appliance into the carton, taking care not to damage
either during this operation.
5. Insert the accessories support and the head block inside the
HOW TO TRANSPORT THE APPLIANCE
carton.
6. Place the accessories in the carton.
7. Close the carton.
ATTENTION: When transporting the appliance on vehicles,
secure it according to the directives in force so that it cannot
slide or tip over.
ATTENTION: Users are advised to always wear protective
gloves, to avoid the risk of serious injury to hands .
COMPONENT POSITIONING
APPLIANCE SAFETY
(Fig. 4-5-6-7-8-9) :
1. Opening / locking motor head
2. Handle
3.
4.
5.
6.
7. Container
8.
9.
10.
11.
12.
13. Vacuum Cleaner Bags
14. Rubber seal
1.
disable it by pushing it (Fig.10) .
2.
it (Fig.10) .
3.
ATTENTION: Users are advised to always wear protective
gloves, to avoid the risk of serious injury to hands .
ATTENTION: To prevent damaging the power cable,
disconnect the plug from the mains socket by directly pulling
the plug and not the cable.