TM RACING 4 Stroke 2009, User And Maintenance Manual

Page: 45 / 80

ENGLISH
ENGLISH ENGLISH
45
FRONT BRAKE BREMBO RADIAL PUMP FRONT BRAKE BREMBO RADIAL PUMP FRONT BRAKE BREMBO RADIAL PUMP FRONT BRAKE BREMBO RADIAL PUMP FRONT BRAKE BREMBO RADIAL PUMP
(SMR/SMM/SMX) (SMR/SMM/SMX) (SMR/SMM/SMX) (SMR/SMM/SMX) (SMR/SMM/SMX)
FRONT BRAKE LEVER ADJUSTMENT FRONT BRAKE LEVER ADJUSTMENT
FRONT BRAKE LEVER ADJUSTMENT FRONT BRAKE LEVER ADJUSTMENT FRONT BRAKE LEVER ADJUSTMENT
The distance of the front brake lever from the handlebar grip can be
adjusted through the adjustment knob (1). Turning it clockwise the
distance increases, turning it anticlockwise the distance decreases.
WARNING
AT THE END OF THE OPERATION VERIFY THAT THE FRONT BRAKE LEVER HAS
A FREE STROKE BEFORE THE BRAKE STARTS TO LOCK THE WHEEL AND THAT
THE FRONT WHEEL CAN ROTATE FREELY WITH THE BRAKE LEVER AT REST. IF
THE FREE STROKE IS MISSING, PRESSURE IS FORMED IN THE BRAKING SYSTEM
AND THE CONSEQUENCE CAN BE LACK OF FUNCTIONING OF THE FRONT
WHEEL BRAKE DUE TO OVERHEATING OR BLOCKING OF THE WHEEL ITSELF.
CHECK FLUID LEVEL CHECK FLUID LEVEL CHECK FLUID LEVEL CHECK FLUID LEVEL CHECK FLUID LEVEL
The reservoir (2) is transparent and allows you to check for the fluid
level: with the reservoir standing up, the fluid level must be always
between MAX and MIN remarks.
IF THE BRAKE FLUID LEVEL FALLS BELOW THE MINIMUM VALUE, IT
INDICATES A LEAKING IN THE BREAKING SYSTEM OR CONSUMPTION OF
BRAKE PADS BEYOND THE ACCEPTABLE LIMIT.
TOP-UP FRONT BRAKE FLUID (A) TOP-UP FRONT BRAKE FLUID (A) TOP-UP FRONT BRAKE FLUID (A) TOP-UP FRONT BRAKE FLUID (A) TOP-UP FRONT BRAKE FLUID (A)
Unscrew and remove the cap (3) and the membrane (4). Keep the
reservoir standing up and top-up the brake fluid to the MAX remark on
the reservoir. Reassemble the membrane, the cap and tighten.Wash
any spilled brake fluid away with water.
- KEEP BRAKE FLUID OUT OF THE REACH OF CHILDREN.
- BRAKE FLUID MAY IRRITATE THE SKIN. DO NOT ALLOW IT TO TOUCH
SKIN OR EYES. IF THE BRAKE FLUID SHOULD ACCIDENTLY SPRAY INTO
THE EYES, RINSE WELL WITH WATER AND SEEK MEDICAL ASSISTANCE.
WARNING
- DO NOT ALLOW BRAKE FLUID TO COME INTO CONTACT WITH PAINTED
PARTS, THE BRAKE FLUID CORRODES PAINT.
- USE ONLY CLEAN BRAKE FLUID OUT OF A HERMETICALLY SEALED
CONTAINER.
CHECK FR CHECK FR CHECK FR CHECK FR CHECK FRONT BRAKE P ONT BRAKE P ONT BRAKE P ONT BRAKE P ONT BRAKE PADS ADS ADS ADS ADS
The brake pads can be checked from below. The thickness of the pad
friction material must not be less than1 mm.
THE THICKNESS OF THE BRAKE PAD THICKNESS MATERIAL MUST NOT BE
LESS THAN 1 MM, OTHERWISE THERE COULD BE A FAULT IN THE BRAKES.
IN THE INTEREST OF YOUR SAFETY HAVE THE THE PADS REPLACED IN
TIME.
WARNING
IF THE BRAKE PADS ARE REPLACED TOO LATE AND ARE COMPLETELY WORN,
THE STEELPARTS OF THE PADS RUB ON THE DISC. THIS LEADS TO A NOTABLE
DECREASE IN THE BRAKING EFFECT AND DAMAGE OF THE BRAKE DISC.
DANGER
FRAME AND ENGINE MAINTENANCE FRAME AND ENGINE MAINTENANCE
FRAME AND ENGINE MAINTENANCE FRAME AND ENGINE MAINTENANCE FRAME AND ENGINE MAINTENANCE
FRAME AND ENGINE MAINTENANCE FRAME AND ENGINE MAINTENANCE
FRAME AND ENGINE MAINTENANCE FRAME AND ENGINE MAINTENANCE FRAME AND ENGINE MAINTENANCE
2
3
4
1
min 1 mm
DANGER