TM RACING 2010 STROKE 250, Workshop Manual

Page: 19 / 88

15
2
1
1
3
5
4
7
6
ADJUSTMENTS/REPLACEMENTS
1.3 ENGINE OIL AND FILTER CHANGE
The oil must be changed with the engine off but still warm enough to allow
the waste oil to flow out easily.
Unscrew the four screws (1) and remove the skid plate (2).
Position the motorcycle on a flat surface and prepare a suitable recipient
under the same.
Loosen the introduction cap (3) positioned on the right side of the engine
(clutch cover) and the drain caps (4 and 5) positioned on the lower side of
the engine; allow the oil to flow out into the recipient.
In the meantime, remove the filter cover (6) situated on the right side
of the engine, loosening the relative screws (7) and paying attention to
collect the oil escaping.