Product Name: Remote Single Single LED Dimming Zigbee Remote
Product Code: K30-2034Z
How to Check Whether the Remote Belongs to a Network or not
Battery Power Monitor Function
The remote will report battery power value to the coordinator under following situations:
•
When powered on.
•
When short pressing both S2 and S3 buttons simultaneously.
•
When operating the switch to send data packets (over 4 hours since last operation).
•
When added to the network by a coordinator.
Other Information
Specifications:
•
Zigbee Dim remote based on ZigBee 3.0
•
Enables to control single colour lighting devices
•
High sensitive & high stable touch colour wheel, fast & precise colour control
•
Battery powered remote with low power consumption
•
Enables to pair Zigbee lighting devices through touchlink commissioning
•
Supports find and bind mode to pair with ZigBee lighting devices
•
Supports 4 groups for binding max. 30 lighting devices
•
2.4 GHz global operation
•
Transmission range up to 30m
•
Compatible with universal ZigBee Gateway products
•
Compatible with universal single colour Zigbee lighting devices
ZigBee Clusters Supported by This Remote Are As Follows:
Input clusters:
•
Basic
•
Power Configuration
•
Identify
•
Diagnostics
Output clusters:
•
Identify
•
Group
•
Scene
•
On/off
•
Level control
•
OTA
OTA
The remote supports firmware updating through OTA, and will acquire new firmware from zigbee controller
or hub every 10 minutes automatically.
1
Activate the remote by clicking All On/Off button (indicator on), then short press any other buttons
except group buttons, indicator blinking 3 times means the remote does not belong to any network,
blinking once or twice means it has already been added to a network.
