172-65133M-04 (LA Series) 1 Oct 2021
9
Removing/Reattaching Cover (LA13L)
Part
During Disassembly
During Reassembly
Cover
Remove with a socket wrench
Consult the table of tightening torques and
tighten to the proper torque
Cover
Gasket
Remove the gasket and clean
sealing surfaces
Replace the gasket only if warped or
damaged
Removing/Reassembling Parts Inside Body
(LA13L)
Part
During Disassembly
During Reassembly
Figure B
Spring Clip
Slot
Figure C
Spring Clip Use needle-nose pliers
to remove, or remove
by hand
Insert securely into the slots in
the X-element guide (see
Figure B)
X-element Grasp the ball on the
top of the X-element
with pliers and remove
Make sure the side of the
X-element with the ball on it is
facing up and insert, keeping
the X-element level and
making sure it does not catch
on the guide (see Figure C)
Valve Seat Remove with a socket
wrench
Consult the table of tightening
torques and tighten to proper
torque
X-element
Guide
Remove without
bending
Fix with the valve seat and
make sure the X-element can
be inserted smoothly
Screen
Remove without
bending
Reinsert without bending
Table of Tightening Torques
(LA13L)
Part
Torque
N
∙m
Distance Across Flats
mm
Cover
80
32
Valve Seat
35
19
(1 N
m
10 kg
cm)
NOTE: -LA13L: DO NOT coat threaded portions with anti-seize.
-If drawings or other special documentation were supplied for the product, any torque
given there takes precedence over values shown here.
