172-65193A-06 (G8) 8 Jul 2015
1
Contents
Introduction .......................................................................... 1
Safety Considerations .......................................................... 2
Checking the Piping ............................................................. 4
Specifications ....................................................................... 5
Configuration ........................................................................ 5
Installation ............................................................................ 6
The Need for a Pressure-balancing Line ............................. 7
Maintenance ........................................................................ 8
Disassembly / Reassembly .................................................. 9
Troubleshooting ................................................................. 11
EXPRESS LIMITED WARRANTY ............................ 12
Introduction
Thank you for purchasing the
Free Float Air Trap.
This product has been thoroughly inspected before being shipped from the
factory. When the product is delivered, before doing anything else, check the
specifications and external appearance to make sure nothing is out of the
ordinary. Also be sure to read this manual carefully before use and follow the
instructions to be sure of using the product properly.
The
G8 Free Float Air Trap is used for the automatic discharge of
condensate or condensate mixed with oil from receiver tanks and pipe ends
in compressed air systems.
If detailed instructions for special order specifications or options not
contained in this manual are required, please contact
for full details.
This instruction manual is intended for use with the model(s) listed on the
front cover. It is necessary not only for installation but for subsequent
maintenance, disassembly/reassembly and troubleshooting. Please keep it in
a safe place for future reference.
