875150 HDBaseT Set 100 HDMI USB RS232 IR
Receiver Front
①
IR Out:
Connect to the supplied IR blaster cable for IR signal transmission.
Place the IR blaster in direct line of sight of the equipment to be controlled.
②
IR In:
Connect to the supplied IR blaster cable for IR signal transmission.
Place the IR blaster in direct line-of-sight of the equipment to be controlled.
③
USB Type A for extension
④
DIP Switch:
Switch to
“
0
”
transmit upto 100m under 4K@60Hz.
Switch to
“
1
”
transmit upto 150m under 1080P@60Hz.(Before power on, TX
and RX must be selected to 0 or 1 at the same time. Please do not switch it in
the working process)
⑤
Audio Switch:
Switch to
“
0
”
extract Audio and output.Switch to
“
1
”
close
extraction Audio output(analog audio and SPDIF).
⑥
Indicator of HDMI
⑦
Indicator of power input
