875150 HDBaseT Set 100 HDMI USB RS232 IR
Panel Description
Transmitter Front
①
IR In:
Connect to the supplied IR blaster cable for IR signal transmission.
Place the IR blaster in direct line-of-sight of the equipment to be controlled.
②
IR Out:
Connect to the supplied IR blaster cable for IR signal transmission.
Place the IR blaster in direct line of sight of the equipment to be controlled.
③
USB Type A for extension
④
USB Type B for connection
⑤
DIP Switch:
Switch to“ 0 ”transmit upto 100m under 4K@60Hz.
Switch to“1”transmit upto 150m under 1080P@60Hz.(Before power on, TX and
RX must be selected to 0 or 1 at the same time. Please do not switch it in the
working process)
⑥
EDID Switch:
Switch to“0”copy EDID from display of receiver(remote EDID
mode).Switch to“1”copy EDID from loopout display of transmitter(local EDID
mode).
⑦
Indicator of HDMI
⑧
Indicator of power input
⑥
Note: EDID copy function on transmitter do not support 150M long
distance, when it is long distance mode, the EDID only support 1080P@60Hz.
