1273_BA_E_Rev0 - VOLspeed Yamaha PW
© TLI Elektronik GmbH
6
Always lock your tuned e-bike when you park it. This will prevent misuse and abuse by other
people.
Observe shortened maintenance and inspection intervals
Due to the higher speeds with electric motor assistance, higher loads and forces will act on all
vehicle parts.
Reaching higher speeds increases wear on all vehicle parts, especially the brake system and all parts
of the drive system, even with suitable strength and design of the vehicle.
Define shortened maintenance and inspection intervals
Shortened inspection and maintenance cycles must be determined by the owner of the tuned e-
bike on his own responsibility, taking into account the conditions of use.
Before each use of your tuned e-bike, perform a comprehensive inspection of the vehicle.
It is imperative that you check the condition and function of the
brakes and their functional components,
vehicle frame,
steering system and its functional components,
drive system and its functional components as well as
saddle and its functional components.
In addition, observe all inspections not mentioned here that are prescribed by the manufacturer
of your e-bike before each use. This list does not replace the original operating instructions of the
e-bike manufacturer.
Establish further inspection and maintenance cycles according to the manufacturer's instructions
for your e-bike.
Shorten them according to your operating conditions.
If necessary, coordinate this with your specialist company, which will carry out the inspection and
maintenance work.
This ensures that the shortened inspection and maintenance intervals are adhered to.
2.3
Know and comply with installation requirements
For safe use of the tuning module in your e-bike, your e-bike must also meet some requirements.
Requirements for the strength and construction of the e-bike
Strength and construction requirements are regulated by EN 15194 and EN ISO 4210-2 and must be
confirmed as applied by the manufacturer of your e-bike.
Prevent increased accident risks due to insufficient strength
IMPORTANT
WARNING
