_____________________________________________________________________________________
LTGSM User Manual 3 Confidential
Safety Precautions
The following general safety precautions must be observed during all phases of system
installation, service, and repair of this equipment. Failure to comply with these
precautions or specific warnings elsewhere in this manual violates safety standards of
design, manufacture, and intended use of this equipment. TLC Solutions, Inc. assumes
no liability for the customer’s failure to comply with these requirements.
The safety precautions listed below represent warnings of certain dangers that TLC
Solutions, Inc. is aware of. As the user of the product, you should follow these warnings
for the safe operation of the equipment in your operating environment.
Read this Guide Thoroughly
CAUTION
- The technician must be completely familiar with the procedures
contained in this document before beginning the actual installation.
Complete
all Steps
CAUTION
- The technician must perform each procedure in its entirety
.
Ground the Equipment
WARNING
- To minimize shock hazard, the equipment should be connected to a
properly grounded electrical outlet.
Only Qualified Personnel Should Service the Equipment
WARNING
- Only trained personnel may remove equipment covers to install and
service the internal assemblies of the LTGSM. The LTGSM contains high-
energy equipment that can cause injury or death. Under certain conditions,
dangerous voltages and/or currents may exist even with the power supply
removed.
Do Not Service or Adjust Alone
WARNING
- Do not attempt internal service or adjustment unless another person
capable of rendering first aid and resuscitation is present. Dangerous voltages
and/or currents, capable of causing injury or death, are present in this
equipment.
WARNING
WARNING
!
CAUTION
!
CAUTION
WARNING
