__________________________________________________________________________________
LTGSM User Manual C1 Confidential
APPENDIX C Configuration Guide
Introduction
This document introduces the Management System of the LTGSM solution and
should initially be read in conjunction with the Quick Start Guide for the LTGSM. The
Quick Start Guide details how to physically connect-up your LTGSM.
This System Administrator User Guide can be used as a training and/or reference
document by anyone who requires access to the Management System in order to
configure, administer, register handsets or support the LTGSM. Typically this is likely
to be a Network Manager, System Administrator, Telecoms Administrator or a
Support member of staff.
Anyone needing to use the LTGSM Management System should refer to the
following section of this document for further information on how to use the LTGSM
interface:
Starting your PMN system configuration
PMX Administrator must first be installed on a server (running IIS) on the PMX system. For
details of how to install PMX Administrator, please refer to the PMX Administrator installation
guide.
Launch PMX Administrator either from the Private Mobile Networks program group on the
start menu of the server where it was installed,
or from a desktop shortcut or browser from any other PC with access to the network.
You will be prompted to enter your user credentials.
Having logged into PMX Administrator, you will be presented with a screen as shown below:
