L1
Service
Manual
TCL
Communication Ltd.
Rev.
9015B Level 1 Service Manual
Page
1.1
18/19
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
a) Using auto test code
Open “Calculator” application, and type “0x0-0+=” to enter MMI test mode, you will then see
the interface displaying the SW version. Select “Auto” to start the auto test, or select “MANU”
to do the MMI test manually.
If one of the tests fails during “Auto” test mode, it will display “Failed: xxx”. In this case, either
press ‘Next’ to go on test or press ‘RETEST’ to retest this item or press ‘END’ to Power off.”
For detailed instruction of each test item, please refer to <MMI TEST> video in
support (CSS/RSH) website.
b)
Using Smart Diagnosis Tool to proceed with the test:
For detail instruction of test with
Smart Diagnosis Tool, please refer to < Smart Diagnosis Manual > in support
(CSS/RSH) website.
4. Software download
The minimum requirements to perform a software download are as follow:
1. Product with Fully charged battery
2. PC with below configurations
CPU: Pentium 1.6 GHz or above;
RAM: 2GB or above;
Operation system: Windows2000
/
XP/Vista/Windows 7/8/10
USB port
Internet connection
with minimum internet speed of 8Mb/s
3. Downloading cable (USB cable)
Please use the dedicated software downloading tool (DL Tool) for this product. The version of this tool
at launched of the product is “Sugar MTK_SP V3.3.5”. Please always use the latest version of the
software downloading tool in order to take advantage of the latest improvements. This DL tool can be
downloaded from support website (CSS/RSH).
