9
2.4 Safety instructions
Permissible
rivet accesso-
ries
Usage as
described in
instruction
manual
Chapter 4.3
Improper
use
The stamping and riveting tool must only be used for rivet-
ing with the approved accessory tools. Only use genuine rivet
mandrels and dies for the two rivet sizes. Note the information
list on the packaging.
Make sure that the riveting tool is problem-free and that it has
all functionality necessary to ensure safe operation.
The tool must only be used as a hand tool with two-
hand operation! Any modification of the tool or other
usage forms are the responsibility of the user.
Follow all health and safety regulations in the country of oper-
ation. Do not use any hoses or fittings that are not permitted
for the equipment’s operating pressure.
Protective gloves and a face mask must be worn during rivet-
ing as incorrect usage or a tool defect could cause parts to fly,
which could lead to severe bodily injury.
See also ANSI Z87.1-1989
Never wave the tool in the air or allow it to fall.
Never use the stamping and riveting tool for purposes other
than those intended and never allow untrained workers to
use the tool.
The riveting tool must only be used at ambient temperatures
between 5°C and maximum 50°C.
Never use the stamping and riveting tool in areas where there
is a risk of explosion!
Summary of Contents for PNP 90 SNW-RIV
Page 31: ...31...
