Front panel
1.The indicator of the direction of
movement of deck A.
2.High-speed recording indicator.
3.Power indicator.
4.LINE recording input indicator.
5.Cro2 tape indicator in the playing mode.
6.Peak value electric level display.
7.Cro2 tape indicator in the recording mode.
8.Digital noise reducing indicator.
9.Recording mode indicator.
10.Deck A.
11.When playing, press it down to play one
side continuously; press it up to play both
sides continuously in deck A.
12.Press it to play the tape in deck A.
13.Press the REW button for rewinding in
deck A.
14.Press FF button for fast-forward.
15.Press it to stop and open the deck.
16.Press it to choose the direction of the
movement of deck A.
17.High-speed recording switch.
18.Left audio recording electric level control.
19.Switch for recording from LINE.
20.Cro2 tape function selection in the play
mode.
21.Power switch.
22.Cro2 tape function selection in the record
mode.
23.Digital noise reducing function off.
24.Right audio recording electric level control.
25.Digital noise reducing function on.
26.Deck B record button
27.Deck B play button.
28.Press the REW button for rewinding in
deck B.
29.Press FF button for fast forward in deck B.
30.Deck B stop.
31.Deck B pause.
32.Deck B.
H).When the recording source and
electric level are correctly set, put the
record tape into deck B as the picture
shows. And close the deck until a
"
Kluck
"
is heard. And press REC in
deck B to start recording.
I).Press the STOP button in deck B
to stop recording.
The importance of cleaning the magnetic head.
The magnetic powder and dust will be piled on the magnetic head, tape guide, and capstan
when the recorder is using. And this will affect the quality of the sound, decrease output
electric level, and cause imperfect erasure of the tape. As a result, poor recording occurs. So,
for better recording and playing, please clean the magnetic head when it works for ten hours.
How to clean magnetic head?
Use the sanitary cotton stick with waterless alcohol to rub the magnetic head, the tape
guide and the capstan. For effective cleaning, please get the cleaning staff from audio
shops. After cleaning, please make sure that the parts are dry when operate the unit.
Cassett B
Cassett A
Tape Guide
Put the Tape
exposed side
downward.
Capstan
Magnetic head
Magnetic head
Magnetic head
Magnetic head
How to degauss?
The magnetic head will be magnetized after long
hours of operation. And the magnetic objects can
also magnetize it. The magnetized head will cause
noise. When noise exceeds a certain extent, the high
frequency of the tape will be erased.
It is suggested that the magnetic head and other
parts working with the tape should be degaussed
once every 20-30 working hours by demagnetize.
(It can be bought at audio shop).
How to deal with minor malfunction?
Demagnetizer