User Manual - Network Dome - TKID45F2S - TKID85F2S - TKID45M1S - TKID85M1S
EN
27
Table 2-7
DNR parameters description
Parameter
Meaning
Configuration Method
2D NR
Reduce noise of image.
[Configuration method]
Select from the drop-down list
[Default value]
Auto
3D NR
Reduce noise of image.
[Configuration method]
Select from the drop-down list
[Default value]
Auto
Max Strength
It is valid in auto noise filter mode.
When the parameter value is
0
, the
noise filter is disabled. When the
parameter value is greater than
0
, the
noise filter is enabled, and the system
automatically adjusts the noise filter
level based on the ambient brightness
without exceeding the value of this
parameter.
[Setting method]
Drag the slider.
[Default value]
50
Fixed Strength
It is valid in a manual noise filter
mode.
[Setting method]
Drag the slider.
[Default value]
50
2.9 Enhance Image
Figure 2-13 shows the enhance image interface and Table 2-8 shows the enhance image
parameter.
