User Manual - Network Dome Camera –
&ϭϬϬϭsϭͲ/ͬd
40
You can check whether the activation is completed on the popup
window. If activation failed, please make sure that the password
meets the requirement and try again.
3.3
Modifying the IP Address
Purpose:
To view and configure the camera via LAN (Local Area Network), you
need to connect the network camera in the same subnet with your
PC. Then, install the TKHSDM software or client software to search
and change the IP of network camera. We will take modifying the IP
Address via TKHSDM software as an example to introduce the IP
address modification.
Steps:
1. Run the TKHSDM software.
2. Select an activate device.
Note:
Please refer to Section 3.2 to activate the camera if the camera is
inactive.
3. Change the device IP address to the same subnet with your
computer by either modifying the IP address manually or checking
the checkbox of Enable DHCP.
