background image

12 

 

Warranty 

 

All  Taska  Contractor  Series  speakers  have  a  3  years  warranty  against  defects  in 
materials  and  workmanship.  Proof  of  Purchase  must  accompany  all  claims.  During 
the  warranty  period  Taska  will  replace  any  defective  part  and  correct  any  defect  in 
workmanship without charge for either parts or labor. 
 
Taska may replace returned speakers with a product of equal value and performance. 
In  such  cases,  some  modifications  to  the  mounting  may  be  necessary  and  are  not 
Taska

’s responsibility. 

 
For this warranty to apply, the unit must be installed and used according to its written 
instructions.  If  necessary,  repairs  must  be  performed  by  Taska.  The  unit  must  be 
returned to Taska 

at the owner’s expense and with prior written permission. Accidental 

damage  and  shipping  damage  are  not  considered  defects,  nor  is  damage  resulting 
from  abuse  or  from  servicing  performed  by  an  agency  or  person  not  specifically 
authorized in writing by Taska. 
 
Taska  products are  sold  only through  authorized  Dealers  and  Distributors  to  ensure 
that customers obtain proper support and service. Taska reserves the right to limit the 
warranty  of  products  purchased  from  an  unauthorized  dealer  or  other  source, 
including retailers, mail order sellers, and online sellers, to ninety (90) days from the 
date of purchase. 
 
Damage to or destruction of components due to application of excessive power voids 
the warranty on those parts. In these cases, repairs will be made on the basis of the 
retail  value  of  the  parts and  labor.  To  return  for  repairs,  the  unit  must  be  shipped  to 
Taska 

at  the  owner’s  expense,  along  with  a  note  explaining  the  nature  of  service 

required. Be sure to pack the speaker(s) in a corrugated container with at least 3" (7.6 
cm) of resilient material to protect the unit from damage in transit. 
 
This Warranty Does Not Cover: 

  Damage  caused  by  abuse,  accident,  misuse,  negligence,  or  improper  operation 

(installation). 

• 

Products that have been altered or modified. 

• 

Any  product  whose  identifying  number  or  decal,  serial  #,  etc.  has  been  altered, 
defaced or removed. 

• 

Normal wear and maintenance. 

 
Due  to  our  continual  efforts  to  improve  product  quality  as  new  technology  and 
techniques become available, Taska Technology reserves the right to revise speaker 
systems specifications without notice. 

 

 

Summary of Contents for SP-C61T
























Reviews: