FITTING INSTRUCTIONS
Product:
T13 Outback Frontal Protection System
Vehicle:
Ford Ranger PXII, PXIII (Non-Tech pack), Everest (UA model only)
Part No.
070SB13N20A
For product warranty please refer to our website www.tjm.com.au
F-12114
Page 17 of 27
03/01/2019
62.
Mark and trim area around aerial:
62.1.
Measure 5 mm up from aerial top edge
60 mm in from outside edge.
62.2.
Measure 5 mm out from aerial side edge
and 100 mm up from bottom edge.
62.3.
Join the two marked lines and trim
63.
Deburr all edges.
64.
Using a supplied M6 x Ø18mm flat washer (1)
and Christmas tree plug, secure the upper
corner of the aerial to the vehicle body as
shown.
65.
Move wiring clip from radiator support panel
to the edge of the antenna where shown,
connect aerial
66.
Insert the supplied grommet through the
antenna hole at the location shown. Secure to
the vehicle with an OE fastener retained from
RHS ONLY
STEP 62.2
STEP 62.1
60mm
5mm
15mm
100mm
STEP 65
STEP 64
RHS ONLY
STEP 66