2
RMS160 FAN DIMENSIONS
RMS160 HOOD DIMENSIONS
GENERAL INFORMATION
Each Radon VAC
TM
is factory line tested before shipment. After opening carton, inspect thoroughly for shipment damage.
Fan should rotate freely and all electrical wires and connections should be secured. If any damage is found, notify freight
carrier and your distributor immediately and file a concealed damage claim.
INSTALLATION GUIDELINES
The RMS160 must be installed by a qualified installer in accordance with these instructions and all local codes or in their
absence in accordance with the latest editions of the International Residential Code and International Electrical Code.
Improper installation can create a hazardous condition such as fire, electric shock or personal injury. To reduce these risks
significantly, use this unit only in the manner intended by the manufacturer. If you have questions, contact Tjernlund
Products. Always disconnect the RMS160 from its power source before installation and servicing.
CAUTION:
For general ventilation use only. Do not use to exhaust hazardous or explosive materials and vapors. No main-
tenance is required for the RMS160, but regular radon testing is recommended to verify levels remain low.
WARNING:
To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device. Do not
plug in fan without PVC attached in order to avoid contact with rotating blower wheel.
The Radon VAC
TM
radon mitigation system is an important part of limiting the entry of radon gas into your home. However,
minimizing your home's exposure to radon requires a comprehensive approach and includes, but is not limited to:
