www.tivolilighting.com tel: 714-957-6101 fax: 714-427-3458
Copyright © 2019 Tivoli 07.08.19
Page 9 of 10
TivoCUE10 Quick Start Guide
Stand-Alone Mode
After creating scenes, they can be downloaded to the TivoCUE10 and run without a computer. Doing this requires a micro SD
memory card (128MB included). The TivoCUE10 can save up to 500 scenes in 10 zones (up to 50 in each zone).
• Click on the Stand Alone tab.
• All areas and their scenes will appear in the expandable menu on the left. Drag specific scenes or entire areas onto
the image of the device screen to add them to the device.
• Added scenes will be displayed to the right. The navigation buttons on the image of the device can be used to simulate
navigating through scenes.
• Use the buttons on the right side of the screen to remove or change the order of the scenes and areas.
• Click “Write the interface memory” to complete the download.
• Click the “DMX Mode” button at the top and select “Stand Alone” to test the new program using the TivoCUE10. Select “Live” to
return the TivoCUE10 to computer control.
