7
again to return to the previous display. Also in DAB mode, press and hold for 3 seconds to
enter the menu, use the Tune +/- buttons to navigate through the menu and the Menu/Select
button to select your choice. The Menu options are: Station order; Manual tune; DRC Value;
Clock (including autoset if clock signal is available); Factory Re-set; and software version.
For more, see “Menu Options”.
In FM mode, press Menu briefly to switch between mono and auto. Stereo is indicated by an
“St” on the display. Press and hold Menu for 3 seconds to enter the clock settings: Set
Clock time; Autoset Clock: (For more, see page 11), and Set Alarm time. Use the Tune
ˆ
/
ˇ
buttons and the Menu/Select to make selections in the menu.
7. INFO: In DAB mode, press to cycle through DAB display options: Scrolling Text; Format;
Channel Name; Date; Clock; Frequency; Data Rate/Stereo/Mono; Signal Error (0-50: good,
50-100: poor) and Battery Level (if batteries are installed.) If using the external power supply
without batteries, the meter will show 3 full bars. Note not all stations broadcast all such
information so some selections might show no information.
In FM mode with RDS on, press briefly to cycle through RDS modes: RT (Radio Text); PTY
(Program Type); Date; Clock; Frequency; and Battery Level (if batteries are installed). If using
the external power supply without batteries, the meter will show 3 full bars. Note not all
stations broadcast all 3 kinds of information so some selections might show no information.
For more, see the section marked “RDS”.
8. AUTO TUNE/RDS: If the SongBook100 is moved to another location or if a new block of
DAB stations have been launched, re-tuning may be necessary. Press briefly to perform a
quick local scan or press and hold for 3 seconds for a full scan (this scan requires more time).
In both instances a status bar will show the progress of the scan. Auto Tune does not affect
stored preset stations.
In FM mode, press to turn RDS on or off.
9. SLEEP: Press and hold to activate the sleep timer for 20 minutes. A confirmation beep will
sound. A “Z” will show on the display to indicate Sleep mode. The SongBook100 will go into
Standby after 20 minutes. Also see “Important Battery Notes”. If the Sleep and Alarm are set
at the same time the two icons will alternate. The Sleep function will not work if the clock
has not been set.
10. ALARM: After setting the alarm wake time in the menu, press and hold to set the alarm to
wake. An alarm bell icon ( ) will show on the display to indicate the alarm is set to wake
and the SongBook100 will go into Standby. When the alarm activates, press this button
to place the SongBook100 into Standby and reset the alarm for the next day. Also see
“Important Battery Notes”. If the Sleep and Alarm are set at the same time the two icons
will alternate. The alarm cannot be set if the clock has not been set.
11. LIGHT: When the external power supply is connected, press to increase the backlight’s
brightness and press again to return to normal brightness. When operating on battery power
only, press the backlight button to increase the backlight’s brightness for 10 seconds. This
method conserves battery power. When on battery power only with the unit switched off,
the display will not be shown to further conserve battery power.
English
