Tivoli Audio PAL +, Owner'S Manual

Page: 16 / 92

Snooze: To activate Snooze, press the Snooze button on the remote, or briefly press the
Multi-Function Control Wheel on top of the unit. The Snooze time is not adjustable. When
operating on battery-only power, pressing Snooze will have no effect.
Note: When in snooze mode, you can see the remaining snooze time by pressing the
Snooze button on the remote. If you press the Alarm or Power button on the remote,
or if you press and hold the Multi-Function Control Wheel on top of the unit, then
the snooze countdown will be cancelled and the PAL+ will go into Standby or off if
operating on battery-only power.
Digital Radio (DAB/DAB+/DMB) Mode:
STATION LIST: Use the pq buttons on the remote, or press the Multi-Function Control
Wheel on top of the unit, to show all available DAB/DAB+/DMB stations. Use the pq
buttons to highlight a specific station and the Select button to tune that station. The Station
list will disappear between 7 and 15 seconds depending on whether it was accessed via
the top Control Wheel or the remote control.
Press and hold the Menu button on the remote to enter the main menu. Use the
pq
buttons and the Select button to change the items within the menu. Use the Back
button to navigate back, or wait for 15 seconds until the timeout expires.
An asterisk (*) indicates the shown menu item is currently set.
Note: Upon entering Digital radio mode, if the Station list is empty,
an auto scan will initiate.
1.
AUTO SCAN: Searches the entire frequency range. If you move the PAL+ to another
location, you must perform a new scan so the radio will find stations in the new location.
To cancel the auto scan, press the Back button on remote.
2.
TIVOLI EQ: Please refer to the section marked “Menu and specific features”.
3.
MANUAL TUNE: Press the
pq buttons to manually tune specific DAB/DAB+/DMB
frequencies, then press Select to tune the displayed frequency.
4. DRC: Dynamic Range Control allows you change the sound level of stations to make
quiet passages louder to compensate for a noisy environment, or when listening at a
low volume level.
5. ADVANCED MODE: If the PAL+ is relocated to a different area, you may find stations
with the same name. If you enable “Advanced View”, “Long labels”, and “Show Ensemble”
under Advanced Mode, you will be able to differentiate between extended station names.
For DAB/DAB+, we suggest disabling all the Advanced Mode settings. For DMB, we
suggest enabling them.
6. UPDATE LIST: If the PAL+ is relocated to a different area, some stations may become
unavailable. Select “Update List” to remove unavailable stations from the Station list. Use
the
pq or t u buttons and the Select button to confirm (Yes) or deny (No) removing
unavailable stations.
NOTE: When moving the PAL+ to another location where there may be different DAB
stations from the previous location, it is recommended to run an “Update List” to remove
unavailable stations.
16
English