6
Guide To Features (Front Panel):
1. POWER:
Push to power the Music System On or Off (Standby).
Figure
Figure
Figure 3
Figure 4
Figure 5
2. ALARM 1/ALARM 2:
Press and hold Alarm or . A beep will confirm you are in the alarm
set-up mode and the corresponding green LED will illuminate. Rotate and press the Volume
knob in to adjust and set the hour (which also determines AM and PM (Figure )) and minutes
(Figure ) and press in to set and move to the next setting. Note, adjusting the hour does not
affect the minutes and vise-versa. Set the alarm source (Figure 3 and 4) and alarm volume
(Figure 5) in the same manner. Setting the alarm source to “AUX” will cause the alarm to wake
to a tone. You will not be able to set the alarm source to CD if a CD isn’t loaded inside. When
the alarm LED is off, press the Alarm button once to set the alarm. The display will briefly
show the time the alarm is set to wake. When the alarm LED is on, press the Alarm button
briefly to turn it off. If the alarm is set and power is lost, the alarm will still sound (the tone will
sound in place of radio or CD) at the designated time provided fresh batteries are correctly
installed in the rear battery compartment. When the alarm activates (Alarm LED flashes) you
may either turn the unit off and keep the alarm set for the next day, press the Snooze button
to temporarily mute the alarm for 7 minutes, or press the Alarm button to cancel activation,
turning the unit off, and keeping the alarm set to wake the next day.
