2. SHUFF (SHUFFLE):
With a CD playing, press to play the tracks in random order. The Shuffle
icon ( ) will show on the Music System’s display when active. Press the Shuffle button a
second time to cancel shuffle play or press Stop. Otherwise, CD playback will stop once all
tracks have been played. Pressing the track up or down ( ) on the remote and on the
Music System during shuffle play may cause tracks to repeat. Note that MP3 CDs with many
tracks may repeat some songs in Shuffle mode. Shuffle cannot be used in conjunction with
Repeat , Repeat All or Intro.
3. INTRO:
With a CD playing, press to audition 0 seconds of each track. The Intro icon ( )
will show on the Music System’s display when active. Press a second time to cancel Intro
play or press Stop. Otherwise, CD playback will stop once all tracks have played.
Note:
The above functions cannot be activated while the disc is loading. If two of the above
functions are used at the same time, both icons will alternate on the display until finished.
4. /-:
Advance or go back to a previous MP3 folder.
5. ENTER:
Same function as pressing the Volume Control in on the Music System to set
selections or adjust the treble.
6. 7,8,9,0:
Use these buttons in addition to the -6 buttons to access a CD track directly. A two
second window is provided to enter another digit after the first digit is entered.
Saved favorite station presets can be recalled using the through 6 buttons on the remote
control. However, favorite stations can only be saved using the through 6 buttons on the
Music System’s front panel.
Controlling volume via the remote is performed using the up/down arrow buttons, while FM/AM
tuning is controlled using the Left and Right arrow (CD track) buttons.
When it comes time to replace the remote control’s battery, use a 3V Lithium Cell #CR05,
installed with the positive side facing the bottom side of the remote.
Important Notes About the CD Player:
• The display does not show the total disc time for MP3/WMA CDs due to their often very
lengthy table of contents. Total time will be shown for commercial music CDs but if either
track +/- buttons are pressed, the total time will disappear since the initial mode was changed.
• Playback will be delayed slightly while the table of contents is read.
• Disc functions will not work while the disc is loading.
• Do not use the Eject button to load a CD.
• Changing modes while a CD is playing causes the CD to stop playback. Playback will resume
when the mode is set to CD again.
• The sound quality of MP3, CD-R/CD-RW, and even commercially recorded discs can vary
greatly. The same holds true for the sound quality of portable MP3 players.
• Do NOT use any CD lens cleaning discs since these are not designed for slot-load machines.
• Avoid bending the disc when loading or ejecting.
• Do not move the unit while a disc is playing and do not ship the unit with a CD inside.
• Do not try to insert a disc in the slot if one is already inside the unit.
• Do not insert specially shaped discs or 3" CD “single” discs.
