TECHNICAL INFORMATION
Capacity:
Blind rivet nuts M4 - M5 – M6 – M8 – M10 – M12
Material:
Aluminium, Steel and Stainless Steel
Size:
465 (L) x 180 (H)
Weight:
1,8 Kg
DESCRIPTION OF THE TOOL
1. Tool body
2. Left and right lever
3. Turning knob
4. Mandrel M12
5. Anvil M12
6. Counter lock nut
7. Front sleeve with stroke indicator
8. Adjust nut
Read the manual
OPERATING INSTRUCTIONS
HAND TOOL FOR BLIND RIVET NUT M4-M12
TIOS HN12 PT
5
Manual
TIOS HN12 PT |
B
A
5
6
mandrel pin
4
Handbuch
TIOS HN12 PT |
INSTRUCTIONS
OPENING THE BOX:
The hand tool will be standard equipped with the M12 anvil and M12 mandrel.
The other components will be stored separate in the carton box.
FIRST USE:
Make sure before using the tool that the anvil and mandrel are suitable for the
thread of the insert to be used. Otherwise change to a different size.
Change to a different size:
Unscrew the anvil (5) and the lock nut (6). Push slightly on the mandrel, to
release the spring and take out the mandrel pin. The mandrel can now be
changed. Replace it by choosing the correct size from the spare parts in the
carton box.
Stroke adjustment:
Close the left and right lever (2) completely, in this way the jaws and internal
spring are released. Loosen the adjust nut (8) and turn the front sleeve (7) with
stroke indicator to the right (clockwise) to reduce the stroke. By reducing the
stroke, the deformation of the rivet nut will be smaller. See below overview for
the correct stroke position for each size of rivet nuts. Now screw the adjust nut
till it is tight, the stroke is adjusted.
Turn the front sleeve (7) with stroke indicator to the left (counter clockwise) to
increase the stroke. By increasing the stroke, the deformation of the rivet nut
will bigger. The correct stroke is dependent on:
• the correct griprange
• the correct blind rivet nut
Nut Size
M4
M5
M6
M8
M10
M12
Stroke Position
2
2,5
3
4
5
6
Movements
1
1
1 - 1,5
1 - 2
2 - 3
3 - 4
H
L
5
2
2
7
8
4
6
3
1
+
unlock
lock
-
7
8
