6
RL20-2 /
Manual
Titgemeyer / 10342EN1121 / 1
English
To avoid damages, always adhere to the
corresponding safety instructions of the
safety measure. Only qualified staff are
authorized to perform maintenance and
repairs of the tool.
6. Special safety advice
The riveting tool is exclusively designed
for setting one-sided blind rivets. The
Customer bears individual responsibi-
lity for each and every change of the
riveting tool!
ATTENTION!
— Use the tool only after reading and
understanding the operating instruc-
tions.
— Do not operate with the tool if you
are ill, under the influence of drugs,
alcohol.
— Do not use the tool when it is incom-
plete and when it has visible mecha-
nical defects.
— Never aim the riveting tool at people
and do not rivet without material.
— Use the riveting tool only at working
temperature ranging from 5°C to 45°C.
— Never get over the maximum limit of
input air-pressure of 7 bar
— In case the provided air pressure
exceeds the max of 7 bar, use appro-
priate equipment to reduce it.
—
Use only fittings and hoses for an
— approved operating pressure of 10
bar in pneumatics.
— Before adjusting or replacing compo-
nents, disconnect the tool from the
compressed air supply
— For the used rivet diameter, use the
suitable nosepiece (5) accordingly.
— Always use personal protective
equipment.
— Tool not in current use must not be
connected to the compressed air
supply
— Use the tool only for riveting
— Do not use the tool without assem-
bled nosecap (6).
— The riveting tool must not be carried
or lifted by the air hose
— Make sure, the suction system is not
activated, while disassembling the
mandrel collector (2), for emptying.
ATTENTION!
Make sure that the mandrel collector
is always attached on the riveting tool
when in use, otherwise there is a risk
of injury.
NOTE
The Manufacturer bears no liability for
damages incurred due to incorrect repair
or using spare parts from other sources.
The warranty is deemed invalid in case
of any repairs have been performed on
the riveting tool, leading to the damage
of the riveting tool or the seals.
