Page 8
For technical questions, please call 1-888-866-5797.
Item 58059
Sa
FE
ty
Op
E
ra
ti
O
n
Maint
E
nanc
E
Sp
E
ci
F
ica
ti
O
n
S
time Delay and Sensitivity
1. To adjust the time taken for the lens to lighten
after welding finishes, select the Delay Button.
2. Delay can be set between 1 (0.1 seconds) and 5
(0.9 seconds). Your selection will be displayed on
the Display Screen.
3. Sensitivity to ambient light can be adjusted
by pressing the Sensitivity Button.
4. Sensitivity can be set between 1 (low sensitivity,
suitable for high amperage welding or welding in
bright conditions) and 5 (high sensitivity, suitable for
lower amperage welding or welding in poor lighting).
adjusting Headband
Adjust the Headband so that the Helmet is seated
securely on your head as low as possible and close
to your face using the following procedure:
1. Adjust Helmet Height by tightening or loosening the
Top Straps until the Helmet fits snug on your head.
2. Adjust the Head Size by using the Head Size
Adjustment Knob. Size should be adjusted so
that the Front Lens Cover is aligned with your
eyes and the Helmet fits firmly on your head.
3. Use the Segmental Positioning Mechanism
to adjust the position of the Protection
Plate for optimal viewing angles.
Figure c: Headgear Layout
Head Size
Adjustment
Top Straps
Segmental
Positioning
Mechanism