Titanium 58059 Owner'S Manual & Safety Instructions Download Page 11

Page 11

For technical questions, please call 1-888-866-5797.

Item 58059
        

SaFEty

OpEra

tiOn

MaintEnancE

SpEciFica

tiOnS

 parts List and Diagram

pLEaSE rEaD tHE FOLLOWinG carEFULLy

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL 
AS A REFERENCE TOOL ONLY.  NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY 
REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO 
MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS 
OF THE PRODUCT.  IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES 
THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND 
LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY 
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS 
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

 parts List

assembly Diagram

part

Description

Qty

1

Helmet Shell

1

2

Outer Protection Lens

1

3

Auto-Darkening Filter Frame

1

4

Auto-Darkening Filter

1

5

Inner Protection Lens

1

6

Headgear

1

record product’s Serial number Here:
note:

 If product has no serial number, record month and year of purchase instead.

note:

 Some parts are listed and shown for illustration purposes only, and are not available 

individually as replacement parts.  Specify UPC 193175431349 when ordering parts.

Summary of Contents for 58059













Reviews: