Titanium 050X, Operating Manual

Page: 21 / 44

21
050X
Set the slide switch to “REV”.
It can’t work if feeding
paper follows with dra-
wing paper.
Some scrapped paper lock automatic
inductive device.
Adapt to the position of the feeding
paper and make it touch the auto-
matic inductive device.
1
Some paper is in the entry,
but shredder does not
work.
After feeding paper, any corner of the
paper is inserted, but the rest doesn’t
touch automatic inductive device.
Set the slide switch to “REV” and
withdraw the shredding paper.
1
The paper is jammed, and
the machine stops rotating.
1. The number of the inserted paper
is larger than the limitation
2. Locked rotor makes the motor
overheated and then temperature
protection set takes action.
Unplug the plug and let the machi-
ne stop for a while.
2
1
Fold the paper and then insert it.
The machine doesn’t start
after inserting a sheet of
paper, or stop running
when paper is being
inserted.
The paper is too thin, too soft, humid,
or too crinkly to activate automatic
inductive device.
1
Set the slide switch to “REV”.
2