BATTERY
CHANGING THE BATTERY
Note: On delivery, the batteries have already been inserted into the lock.
1) Open the zip fastener at the base of the inner liner of the front shell of
the X-RAY PRO.
2) Open the battery compartment F and insert three AAA 1.5 V batteries,
as shown in the battery compartment.
3) Close the battery compartment
F
and the zip fastener of the inner liner.
LOW BATTERY CHARGE
If the light
C
flashes red after the lock is opened, the batteries will soon not
have enough charge and must be replaced!
I
MPORTANT:
If the batteries run down please make sure to change the batteries
in time. If the battery level is low, then the batteries should be replaced when the
lock is open.
USB-PORT
(FOR SIZE S TROLLEYS ONLY)
In order to be able to charge mobile electronic devices such as smart-
phones or tablets with the USB port, connect a suitably charged power
bank to the USB cable in the zip compartment on the inside left of
the case. Place the power bank in the compartment and close the
zip fastener.
You can now connect your device to be charged using the charging
cable and the USB port on the outside of the case. USB port and cable
may be charged to max. 3.0 A.
