background image

18V COMBI DRILL Li-ion          TTI270COM

6.  Service   

     a. Have your power tool serviced by a qualified repair person using only 

     identical replacement parts. 

This will ensure that the safety of the power tool is 

      maintained.

ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR DRIVER DRILL 

FOR DRILL

1. Wear ear protection with cordless drill. Exposure to noise can cause hearing loss.

2. Hold tool by insulated gripping surfaces when performing an operation where the drill bit tool 

may contact hidden wiring. Contact with a ‘live’ wire will also make exposed metal parts of the tool 

‘live’ and shock the operator.

3. Remove the battery pack from the drill before carrying out adjustments.

4. Do not expose to rain or water.

5. Do not store the battery pack in temperatures over 40°C

6. Always charge the battery pack between temperatures 0°C to 30°C. Ideal charging temperature 

is 18°C to 24°C.

7. Only use the charger and the battery pack provided, no other battery is suitable.

8. Avoid short circuit of the battery pack connections (screws & nails).

9. Do not incinerate or burn the battery pack, it may explode.

10. Do not charge a damaged battery pack.

11. Replace any damaged supply cords on your charger.

12. Always disconnect the charger power supply before making or breaking the connections to the 

battery pack.

13. Your battery pack and charger will be warm during charging, this is normal.

14. When not in use, remove a charged battery pack from the charger.

15. Always remove the battery pack from the charger immediately after re-charging is completed.

16. Your drill and battery pack will be warm when working, this is normal.

17. Do not dispose of batteries in fire, or with household waste. Return exhausted batteries to 

your local collection or recycling point.

18. Always check walls, floors and ceilings for hidden power cables and pipes. 

19. Accessories and metal parts can become very hot.

FOR CHARGER

1. This appliance is not intended for use by persons (including children) with reduced physical, 

sensory or mental capabilities, or lack of experience and knowledge, unless they have been given 

supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

2. Charger is double insulated for additional electrical safety.

3. Charger is for indoor use only.

4. If the charger supply cord is damaged, it must be replaced by the manufacturer, its

service agent or similarly qualified persons in order to avoid a hazard.

5. Never charge damaged batteries as these can short circuit and over heat.

       

Summary of Contents for TTI270COM




















Reviews: