03
Power cord
If the replacement of the supply cord is necessary, this has to be done by the
manufacturer or his agent in order to avoid a safety hazard.
04
Replacement of the plug shall always be carried out by the manufacturer of the tool or
his service organization and follow the instructions below.
code:
As the colours of the wire in the mains lead of this product may not correspond with
the coloured marking identifying the terminals in your plug, proceed as follows. The
wire, which is coloured blue, must be connected to the terminal, which is marked with
13 AMP fuse
approved to
BS 1362
Cable grip
Outer sleeve
Connect
Blue to
WARNING!
disposing of the plug and severed cable, it must be destroyed to prevent
engaging into a socket.
23
