31
MWDV16L-A by
MacAllister
In
more
detail ...
Wet vacuuming
> During wet vacuuming, check the water level in
the tank regularly. The water level should
be below the air inlet (9) (Fig. 26). Empty the tank (4)
regularly if large quantities of water are to be
vacuumed.
NOTE:
After wet vacuuming, turn the machine off and remove plug
from power supply; remove the drain cap (8a) and drain the liquid into
a suitable receptacle or drain (Fig. 27). Remember to refit the tank with
the drain cap. Make sure the filters and tank are dry and clean before dry
vacuuming.
WARNING!
Do not overfill the tank (4) (max 30 litres)!
Do not fill with any other liquids than water as they might be harmful to
the product attachments and surfaces.
Operation
4
8a
9
4
9
Fig. 26
Fig. 27
TTB777VAC by
TITAN
