19
MWDV16L-A by
MacAllister
Getting
Started ...
> Align and slide the rear wheels (5) onto the supports. The rear wheels and the
vacuum base are marked with the numbers 1 and 2. Insert wheel 1 into slot 1
on the back of the vacuum; insert wheel 2 into slot 2 on the back of the vacuum.
Secure the connection with the screws (5a), using a suitable crosshead
screwdriver (Fig. 3 & 4).
> Turn the assembled main body with the castors (7) and rear wheels (5) right way
up and place it on a flat, stable surface. Ensure that castors rotate smoothly.
Before you start
4
5a
5
2.
1.
Fig. 3
Push/Pull handle
> Align the screw holes on the handle sockets (16), PVC washers (16a), rubber
washers (16b) and washers (16c) with the screw holes on the tank (4). Secure
the connection with the screws (16d) clockwise (Fig. 5).
Fig. 4
TTB777VAC by
TITAN
