background image

TTB669PRW 

by TITAN

Your product

EN

Getting 

started...

14

Technical specifications

 

>

Maximum rated flow Q

max

:

7.2 l/min

 

>

Rated temperature T

:

max. 50 °C

 

>

Gun kickback force at maximum 

pressure

:

9.4 N

Pressure hose

 

>

Permissible pressure

:

160 bar (16 MPa)

 

>

Maximum temperature

:

60 °C

 

>

Length

:

6 m

Water hose (not supplied)

 

>

Quality

:

reinforced

 

>

Diameter

:

min. ø 12.7 mm (1/2”)

 

>

Max. length

:

10 m

Sound values

 

>

Sound pressure level L

pA

:

79 dB(A)

 

>

Uncertainty K

pA

:

3 dB(A)

 

>

Sound power level L

WA

:

92 dB(A)

 

>

Uncertainty K

WA

:

3 dB(A)

Hand arm vibration values

 

>

Hand arm vibration a

h

:

1.8 m/s² (< 2.5 m/s²)

 

>

Uncertainty K

:

1.5 m/s²

The sound values have been determined according to noise test code given in 

EN 60335-2-79, using the basic standards EN ISO 3744 and EN ISO 11203. 

The  sound  intensity  level  for  the  operator  may  exceed  80  dB(A)  and  ear 

protection measures are necessary.

The declared vibration value has been measured in accordance with a standard 

test method (according to EN 60335-2-79) and may be used for comparing 

one product with another. The declared vibration value may also be used in a 

preliminary assessment of exposure.

WARNING! 

Depending on the actual use of the product the vibration 

values can differ from the declared total. Adopt proper measures to 

protect  yourself  against  vibration  exposures.  Take  the  whole  work 

process including times the product is running under no load or 

switched off into consideration. 

Proper measures include among others regular maintenance and 

care of the product and accessories, keeping hands warm, periodical 

breaks and proper planning of work processes.

MNL_TTB669PRW_TIT_GB_V03_150818.indd   14

8/18/15   4:16 PM

Summary of Contents for TTB669PRW













































Reviews: