saw blade, rotate it and retighten firmly.
8. SAWING WITH THE END CUT SAW BLADE
(See Fig. 7)
Warning: The sawing teeth are very
sharp. Do not touch during mounting and
application.
The workpiece must be inserted firmly or
clamped tightly before it is cut.
Typical application: wood, plaster board, soft plastics
and metal (e. g. nails).
When plunging and sawing use a slight pendulum
motion, to allow sufficient chip removal.
9. SCRAPING
Typical application: Scraping off old varnish or
adhesives, removing glued carpeting, e. g. on stairs
or other small to medium-sized surfaces.
Select medium / high oscillation frequency.
a
1
1
2
Fig. 7
